Conditions Available
Warranties Available
LP9002DC-E
by Emulex
2 x LC - PCI - 2.12Gbps
- Description:
- The LP9002DC Dual Channel PCI host bus adapter offers two independent 2Gb/s Fibre Channel HBA interfaces in a single PCI slot. It delivers exceptional performance through the use of two Emulex Centaur ASICs, two 266MIPS onboard processors, high speed buffer memory, and a high performance 64 bit 66MHz PCI bridge. The LP9002DC features automatic speed negotiation capability which allows complete compatibility with existing 1Gb/s Fibre Channel SANs, while allowing seamless upgrades to higher speed 2Gb/s SANs.The LP9002DC also features sophisticated hardware that provides superior performance in SANs, delivering low latency and high throughput in fabric, arbitrated loop and clustered environments. Support for the fiber optic cabling is provided through embedded small form factor (LC) optical interfaces.
General Information
- Product Type
- Fibre Channel Host Bus Adapter
- Manufacturer Part Number
- lp9002dce
- Manufacturer Website Address
- http://www.emulex.com
- Manufacturer
- Emulex Corporation
- Product Name
- LP9002DC Dual Channel PCI Host Bus Adapter
- Product Line
- LightPulse
- Brand Name
- Emulex
Media & Performance
- Data Transfer Rate
- 1.06 Gbit/s
- Fiber Optic Cable Standard
- 62.5/125 µm
- Media Type Supported
- Optical Fiber
- Fiber Mode Supported
- Multi-mode
Miscellaneous
- Additional Information
- Automatic speed negotiationOnboard hardware context cache for superior fabric performanceSupport for concurrent multiple protocolsEmulex Centaur ASIC technology3.3V signaling5V tolerantAirflow Required: 100 lfm
- Compatibility
- Software Environments:Windows Server 2003Windows 2000Windows NTHP-UXLinuxAIXNetWareSolaris x86Hardware Environments:x86SPARCPowerPC
- Certifications & Standards
- PCI 2.2SW-2 switch standardAgency Approvals:Class 1 Laser Product per DHHS 21CFR (J) & EN60825UL recognized to UL 1950CUR recognized to CSA22.2, No. 950TUV certified to EN60950FCC rules, Part 15, Class AICES-003, Class AEMC Directive 89/336/EEC (CE Mark)EN55022, Class AEN55024Australian EMC Framework (C-Tick Mark)AS/NZS 3548, Class AVCCI, Class A
Physical Characteristics
- Card Length
- Short Length
Technical Information
- Host Interface
- PCI
- Topology
- Switched Fabric
- Fibre Channel Class Supported
- Class 3
- Number of LC Ports
- 2
- Total Number of Fibre Channel Ports
- 2
- Fiber Channel Port Type
- F_Port
- Data Transfer Rate
- 1.06 Gbit/s
- Fiber Optic Cable Standard
- 62.5/125 µm
- Media Type Supported
- Optical Fiber
- Fiber Mode Supported
- Multi-mode
