Conditions Available
Warranties Available
CAB-GELX-625
by Cisco
SC Male - SC Male - 9.84ft
- Nsn:
- 5995015419277
- Description:
- The patch cord is required to comply with IEEE standards. The IEEE found that link distances could not be met with certain types of fiber-optic cable due to a problem in the center of some fiber-optic cable cores. The solution is to launch light from the laser at a precise offset from the center, which is accomplished by using the patch cord. At the output of the patch cord, the LX/LH GBIC is compliant with the IEEE 802.3z standard for 1000Base-LX. Less than 328 feet (100 meters). When illuminating short lengths of MMF with an LX/LH GBIC, the mode-conditioning patch cord reduces the amount of optical power coupled into the MMF. Excessive power can saturate the LX/LH receiver causing an elevated bit error rate (BER) greater than 984 feet (300 meters). When illuminating long lengths of MMF with an LX/LH GBIC, the mode-conditioning patch cord offsets the laser light to reduce the possibility of differential mode delay.
General Information
- Brand Name
- Cisco
- Manufacturer
- Cisco Systems, Inc
- Manufacturer Part Number
- CAB-GELX-625=
- Manufacturer Website Address
- http://www.cisco.com
- Product Name
- Patch Cable
- Product Type
- Data Transfer Cable
Miscellaneous
- Certifications & Standards
- Agency Approvals: UL2 1950CSAC22.2 No. 950EN60950IEC950TS001AS/NZS 3260 CE Marking Safety:FCC Part 15, Class A (CFR47) (USA)ICES003 Class A (Canada)EN55022 Class A (Europe)CISPR22 Class A (International)AS/NZS 3548 Class A (Australia)VCCI Class A (Japan) with UTP EMI:EN55022 Class B (Europe)CISPR22 Class B (International)AS/NZS 3548 Class BVCCI Class B (Japan) with STP,
- Compatibility
- Cisco Switch Catalyst 5000 Series
Technical Information
- Cable Characteristic
- Patch Cable
- Cable Length
- 9.84 ft
- Conductor
- Copper
- Connector on First End
- 1 x SC Male IEEE 802.3
- Connector on Second End
- 1 x SC Male IEEE 802.3
