Conditions Available
Warranties Available
ESR-24CT1/E1
by Cisco
24 x T1/E1
- Description:
- The Cisco 10000 Series 24-Port Channelized E1/T1 Line Card provides flexibility, scalability, and an enhanced price-to-performance ratio in the E1/T1 aggregation market. Targeted primarily at Internet service providers (ISPs) for situations in which fiber interfaces are unavailable or prohibitively expensive, the Cisco 10000 Series Channelized E1/T1 Line Card supports 24 E1/T1 ports (Layer 2 connectivity), each of which can be independently channelized down to DS0 or NxDS0. Layer 3 services are supported by the Cisco 10000 Series advanced Performance Routing Engine (PRE). By taking advantage of the advanced PRE architecture, ISPs will enjoy the necessary processing performance to enable the advanced IP services that users demand.
Interfaces/Ports
- Interfaces/Ports Details
- 24 x RJ-48C T1/E1 WAN
General Information
- Product Type
- Service Module
- Manufacturer Part Number
- ESR-24CT1/E1=
- Manufacturer Website Address
- http://www.cisco.com
- Manufacturer
- Cisco Systems, Inc
- Product Name
- 24-Port Channelized E1-T1 Line Card
- Brand Name
- Cisco
Media & Performance
- Twisted Pair Cable Standard
- Category 5
- Maximum Data Transfer Rate
- 2.05 Mbit/s
- Media Type Supported
- Twisted Pair
Miscellaneous
- Additional Information
- Spare ProductE1 Specific Features:Framed or unframed modes; 31 time slots (DS0s) available to user in framed modeEuropean 2.048-Mbps TU G.703 and G.704 serial interfacesLocal or network loopback for any E1 port; network loopback supports line and payloadCyclic redundancy check (CRC4) and non-CRC framing modesRemote alarm indication (RAI)-]This alarm is transmitted from the remote CSU/DSU when an alarm condition is detected in the received signal or when a high bit-error-rate occursT1-Specific Features:Alternate mark inversion (AMI) or bipolar eight-zero substitution (B8ZS)Super Frame or Extended Super Frame modesUp to 24 separate interfaces per T1 portSupport for facility data link (FDL)-Full American National Standards Institute (ANSI) T1.403 mode; ATT 54016 response messages only; SmartJack remote loopbackPerformance monitoring-Local and remoteLoopback for each T1 port-Line and payload (types of network loopback), local, remoteCounting of framing bit errors, CRC-6 errorsYellow alarm - Transmitted from the remote CSU/DSU when an alarm condition is detected in the received signal
- Compatibility
- Chassis: The line card is supported on all Cisco 10000 Series chassisPREs: The line card is supported on all PREs available on the Cisco 10000 Series
Physical Characteristics
- Weight (Approximate)
- 4.75 lb
- Form Factor
- Hot-swappable
- Height
- 16"
- Width
- 1.1"
- Depth
- 10"
Technical Information
- Application/Usage
- Data Networking
JUNIPER jnp-qsfp-40ge-ir4
(END USER) QSFP+ 40GBASE-IR4 40GB OPTICS PERP 1310NM FOR UP TO 2KM TR
