Conditions Available
Warranties Available
CISCO2811-SHDSL/K9
by Cisco
2 x AIM, 2 x PVDM - 2 x 10/100Base-TX LAN, 2 x USB
- Unspsc:
- 43222609
- Upc:
- 746320976488
- Description:
- The Cisco 2811 provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series.
General Information
- Brand Name
- Cisco
- Manufacturer
- Cisco Systems, Inc
- Manufacturer Part Number
- CISCO2811-SHDSL/K9
- Manufacturer Website Address
- http://www.cisco.com
- Product Model
- 2811
- Product Name
- 2811 Integrated Services Router DSL Bundle
- Product Series
- 2800
- Product Type
- Router
I/O Expansions
- Expansion Slot Type
- PVDM
- Number of Total Expansion Slots
- 9
Interfaces/Ports
- Management Port
- Yes
- Number of Network (RJ-45) Ports
- 2
- Total Number of Ports
- 2
- USB
- Yes
Management & Protocols
- Security Features
- Secure ShellMultiprotocol Label Switching (MPLS) VPN support
Memory
- Flash Memory
- 64 MB
- Maximum Memory
- 760 MB
- Memory Technology
- DRAM
- Standard Memory
- 256 MB
Miscellaneous
- Additional Information
- Network-module slot:Supports NM and NME type modulesAIM slots:Dual AIM slots support concurrent services such as hardware-accelerated security, ATM segmentation and reassembly (SAR), compression, and voice mailPVDM (DSP) slots on motherboard:DSP (PVDM2) modules deliver support for analog and digital voice, conferencing, transcoding, and secure Real-Time Transport Protocol (RTP) applicationsInterface card slots:Each slot can support HWIC, WIC, VIC, or VWIC type modulesWIC-1SHDSL-V2 Feature:Symmetrical WAN speeds up to 2.3Mbps over a single copper pair and up to 4.6Mbps over two copper pairsBased on ITU Recommendation G.991.2Support for G.shdsl Annex A (U.S. signaling)Extensive ATM CoS and IP QoS supportOperates back-to-back or via DSLAMSustains up to 23 virtual circuits Per WAN Interface CardOperation Altitude (derate 1.5°C per 1000 ft):27.5°C @ 15 kft35°C @ 3km/10 kft40°C @ sea levelPower Dissipation:AC without IP phone support: 170W (580 BTU/hr)Noise Level:47 dBA for normal operating temperature (<90°F/32.2°C)57 dBA (@ maximum fan speed)
- Certifications & Standards
- USB 1.1WIC-1SHDSL-V2: Based on ITU Recommendation G.991.2IEEE:IEEE 802.3: 10BASE-TIEEE 802.3u: 100BASE-TXSafety:UL 60950CAN/CSA C22.2 No. 60950IEC 60950EN 60950-1AS/NZS 60950Immunity:EN300386EN55024/CISPR24EN50082-1EN61000-6-2EMC:FCC Part 15ICES-003 Class AEN55022 Class ACISPR22 Class AAS/NZS 3548 Class AVCCI Class AEN 300386EN61000-3-3EN61000-3-2TELCOM:Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's
- Package Contents
- 2811 Integrated Services RouterCisco 2800 IOS SP SERVICESDevice manager for routers (ROUTER-SDM)256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC)64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC)1-Port G.SHDSL WIC with Four Wire Support (WIC-1SHDSL-V2)Blank WAN Interface Card Panel (WIC-BLANK-PANEL)Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL)Cisco 2811 AC power supply (PWR-2811-AC)Power Cord, 110V (CAB-AC)RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management accessOne pair of rack-mount brackets with screws for 19-inch racksCisco product registration card; Cisco.com cardEthernet cable for LAN interfaceCisco 2800 Series Regulatory Compliance and Safety Information documentCisco Router and Security Device Manager (SDM) Quick Start Guide documentCisco 2800 Series Integrated Services Routers Quick Start Guide
Network & Communication
- Ethernet Technology
- Fast Ethernet
- Network Technology
- 10/100Base-TX
Physical Characteristics
- Compatible Rack Unit
- 1U
- Depth
- 16.4"
- Form Factor
- Wall Mountable
- Height
- 1.8"
- Weight (Approximate)
- 14 lb
- Width
- 17.3"
Power Description
- Input Voltage
- 220 V AC
- Power Source
- AC Adapter
- Redundant Power Supply
- Yes