NM-2FE2W
by Cisco

---

2 x 10/100Base-TX - 2 x WIC/VWIC

Brand Name

Cisco

Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

NM-2FE2W=

Manufacturer Website Address

http://www.cisco.com

Product Model

NM-1FE-FX-V2

Product Name

Network Module

Product Type

Network Module

Expansion Slot Type

WIC

Number of Total Expansion Slots

2

Interfaces/Ports Details

2 x RJ-45 10/100Base-TX Auto-sensing LAN

Ethernet Technology

Fast Ethernet

Maximum Data Transfer Rate

100 Mbit/s

Media Type Supported

Twisted Pair

Network Technology

10/100Base-TX

Additional Information

Modular Router Solutions: LAN-to-LAN RoutingVPN & Firewall SolutionsDSL AccessDialup Remote AccessISDN ConcentrationSerial & Legacy Concentration The Maximum Number of NMs that can be utilized in each of the 2600/3600 families is as follows:2691: 13620: 23640: 43660: 63725: 23745: 4 Protocols supported:Full Cisco IOS software as of 12.0(7)XK WIC Performance:Up to 8Mb/s per WIC (with just 1 WIC installed)Uses the same Fast Ethernet controller as all other Cisco 2600/3600 Fast Ethernet portsWICs are not hot swappable. The network modules support hot swap in the Cisco 3660.Supports a maximum of two channel groups per VWICDoes not support ISDN PRIDoes not support Fast EtherChannel Comments:No reliance on other network modules, WAN interface cards, voice interface cards, or advanced integration modules. Will only operate in 3600 series routers.

Compatibility

Supported Platforms & Minimum IOS Versions: 3745 - 12.2(8)T3725 - 12.2(8)T3660 series - 12.0(7)XK3640 - 12.0(7)XK3620 - 12.0(7)XK2691 - 12.2(8)T12650 - Not Available2600XM Series - Not Available2600 series - Not Available1720 - Not Available1600 series - Not Available Network interfaces: - Compatible with all existing network modules and WICs supported by Cisco 2600/3600 family Not supported:WIC36-1B-S/TWIC36-1B-UWIC-1B-S/T-LLWIC-1ENET

Depth

7.2"

Height

1.6"

Shipping Weight (Approximate)

1.90 lb

Weight (Approximate)

2.50 lb

Width

7.1"

Application/Usage

Data Networking