Conditions Available
Warranties Available
AIR-LAP1242AG-E-K9
by Cisco
108Mbps
- Unspsc:
- 43222631
- Nsn:
- 5895015882312
- Description:
- The Aironet 1240AG IEEE 802.11a/g Non-modular LWAPP Access Point delivers the versatility, high capacity, security, and enterpriseclass features demanded by WLAN customers. These IEEE 802.11a/b/g access point is designed specifically for challenging RF environments such as factories, warehouses, and large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, and a broad operating temperature range. The Aironet 1240AG IEEE 802.11a/g Non-modular LWAPP Access Point works in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). It can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information with no manual intervention. Autonomous access points are based on Cisco IOS Software and may optionally operate with the Cisco Works Wireless LAN Solution Engine (WLSE).
Interfaces/Ports
- Fast Ethernet Port
- Yes
- Number of Network (RJ-45) Ports
- 1
General Information
- Product Type
- Wireless Access Point
- Manufacturer Part Number
- AIR-LAP1242AG-E-K9
- Manufacturer Website Address
- http://www.cisco.com
- Manufacturer
- Cisco Systems, Inc
- Product Name
- Aironet 1242AG Wireless Access Point
- Product Line
- Aironet
- Product Series
- 1240AG
- Brand Name
- Cisco
Miscellaneous
- Additional Information
- Antenna Connectors:2.4 GHz: Dual RP-TNC connectors5 GHz: Dual RP-TNC connectors
- Package Contents
- Aironet 1240AG IEEE 802.11a/g Non-modular LWAPP Access PointMounting hardware kitQuick Start Guide: Cisco Aironet 1240AG Series Access PointSafety Warnings for Cisco Aironet 1240AG Series Access PointsCisco product registration and Cisco documentation feedback cardsMounting plate:Cable security bracket2 x suspended ceiling T-rail clips (accommodates standard and recessed T-rails)1 x security hasp4 x (6 x 32 x ½ inches) pan head Phillips machine screws1 x (8 x 18 x ¾ inches) pan head Phillips sheet metal screws2 x No. 8 plastic wall anchors1 x (10 x 24) nut (for ground stud on mounting bracket)4 x rubber foot pads2 x cable tie wraps
- Certifications & Standards
- Wi-fiUL 60950-1CAN/CSA-C22.2 No. 60950-1UL 2043IEC 60950-1EN 60950-1NIST FIPSRadio approvals:FCC Part 15.247, 15.407RSS-210 (Canada)EMI and susceptibility (Class B)ICES-003 (Canada)Security:IEEE 802.11i, WPA2, WPAIEEE 802.1XAES, TKIPOther:IEEE 802.11aIEEE 802.11bIEEE 802.11gFCCRSS-102
Physical Characteristics
- Weight (Approximate)
- 2 lb
- Form Factor
- Wall Mountable
- Height
- 1.1"
- Depth
- 8.5"
Power Description
- Input Voltage
- 220 V AC
- Power Source
- Power Supply
Technical Information
- Wireless Security
- WPAWPA2 (802.11i)Cisco message integrity check (MIC)IEEE 802.11 WEP keys of 40 bits and 128 bitsEAP-Flexible Authentication via Secure Tunneling (EAP-FAST)Protected EAP-Generic Token Card (PEAP-GTC)PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)EAP-Transport Layer Security (EAP-TLS)EAP-Tunneled TLS (EAP-TTLS)EAP-Subscriber Identity Module (EAP-SIM)AES-CCMP encryption (WPA2)TKIP (WPA)WPA TKIPIEEE 802.11 WEP keys of 40 bits and 128 bits
- Wireless Transmission Speed
- 108 Mbit/s
- Wireless LAN Standard
- IEEE 802.11a/b/g
- ISM Band
- Yes
- UNII Band
- Yes
- Indoor Antenna Range
- 460 ft
- Outdoor Antenna Range
- 950 ft
- ISM Minimum Frequency
- 2.41 GHz
- ISM Maximum Frequency
- 2.40 GHz
- UNII Minimum Frequency
- 5.15 GHz
- UNII Maximum Frequency
- 5 GHz
- Antenna Gain
- 3.5 dBi
- Antenna Type
- Omnidirectional Antenna
- Antenna Connector
- RP-TNC Connector
- Total Number of Antennas
- 4
