Conditions Available
Warranties Available
AIR-LAP1242AG-K-K9
by Cisco
108Mbps - 1 x
- Unspsc:
- 43222631
- Description:
- The Aironet 1242AG IEEE 802.11a/g Non-modular LWAPP Access Point delivers the versatility, high capacity, security, and enterprise-class features demanded by WLAN customers. These IEEE 802.11a/b/g access point is designed specifically for challenging RF environments such as factories, warehouses, and large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, and a broad operating temperature range. The Aironet 1242AG IEEE 802.11a/g Non-modular LWAPP Access Point works in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). It can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information with no manual intervention. Autonomous access points are based on Cisco IOS Software and may optionally operate with the Cisco Works Wireless LAN Solution Engine (WLSE).
General Information
- Brand Name
- Cisco
- Manufacturer
- Cisco Systems, Inc
- Manufacturer Part Number
- AIR-LAP1242AG-K-K9
- Manufacturer Website Address
- http://www.cisco.com
- Product Line
- Aironet
- Product Name
- Aironet 1242AG IEEE 802.11a/g Non-modular LWAPP Access Point
- Product Series
- 1240AG
- Product Type
- Wireless Access Point
Interfaces/Ports
- Fast Ethernet Port
- Yes
- Management Port
- Yes
Miscellaneous
- Additional Information
- Ranges measured with 2.2-dBi dipole antenna for 2.4 GHz, and 3.5-dBi omnidirectional antenna for 5 GHzAntenna Connectors:2.4 GHz: Dual RP-TNC connectors5 GHz: Dual RP-TNC connectors
- Certifications & Standards
- Wi-FiFCC Bulletin OET-65CRSS-102IEEE 802.3IEEE 802.3uIEEE 802.3afIEEE 802.11iIEEE 802.1xIEEE 802.11aIEEE 802.11bIEEE 802.11gSafety:UL 60950-1CAN/CSA-C22.2 No. 60950-1UL 2043IEC 60950-1EN 60950-1NIST FIPS 140-2 level 2 validationRadio approvals:FCC Part 15.247, 15.407RSS-210 (Canada)EN 300.328, EN 301.893 (Europe)ARIB-STD 33 (Japan)ARIB-STD 66 (Japan)ARIB-STD T71 (Japan)AS/NZS 4268.2003 (Australia and New Zealand)EMI and susceptibility (Class B)FCC Part 15.107 and 15.109ICES-003 (Canada)VCCI (Japan)EN 301.489-1 and -17 (Europe)
- Package Contents
- Aironet 1242AG IEEE 802.11a/g Non-modular LWAPP Access PointMounting hardware kitQuick Start Guide: Cisco Aironet 1240AG Series Access PointSafety Warnings for Cisco Aironet 1240AG Series Access PointsCisco product registration and Cisco documentation feedback cardsMounting plate:Cable security bracket2 x suspended ceiling T-rail clips (accommodates standard and recessed T-rails)1 x security hasp4 x (6 x 32 x ½ inches) pan head Phillips machine screws1 x (8 x 18 x ¾ inches) pan head Phillips sheet metal screws2 x No. 8 plastic wall anchors1 x (10 x 24) nut (for ground stud on mounting bracket)4 x rubber foot pads2 x cable tie wraps
Physical Characteristics
- Depth
- 8.5"
- Form Factor
- Wall Mountable
- Height
- 1.1"
- Weight (Approximate)
- 2 lb
Power Description
- Input Voltage
- 220 V AC
- Power Source
- Power Supply
Technical Information
- Antenna Connector
- Dual RP-TNC Connector
- Indoor Antenna Range
- 460 ft
- ISM Band
- Yes
- ISM Maximum Frequency
- 2.46 GHz
- ISM Minimum Frequency
- 2.41 GHz
- Outdoor Antenna Range
- 900 ft
- Total Number of Antennas
- 4
- UNII Band
- Yes
- UNII Maximum Frequency
- 5.83 GHz
- UNII Minimum Frequency
- 5.15 GHz
- Wireless LAN Standard
- IEEE 802.11a/b/g
- Wireless Security
- WPAWPA2 (IEEE 802.11i)TKIPAES encryptionAES-CCMP encryption (WPA2)IEEE 802.11 WEP keys of 40-bits and 128-bitsIEEE 802.1x EAP types:EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)Protected EAP-Generic Token Card (PEAP-GTC)PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)EAP-Transport Layer Security (EAP-TLS)EAP-Tunneled TLS (EAP-TTLS)EAP-Subscriber Identity Module (EAP-SIM)LEAP
- Wireless Transmission Speed
- 108 Mbit/s
CISCO air-lap1252ag-a-k9
Cisco AIR-LAP1252AG-A-K9 Aironet 1252 802.11A/G/N Lightweight Access Point
